Ball Type Check Valve

Ball Type Check Valve is a type of valve which only permits flow in one direction. Ball Type Check Valves are often designed for safety reasons, to prevent back flow and to ensure that someone operating a system knows which direction fluids and gases are flowing in. Ball Type Check Valves can also be used for tasks like creating leak tight seals, which can be an important safety or convenience future. Ball Type Check Valves are also used for the routine task of directing fluids or gases efficiently through a system.

Ball Type Check Valve Specifications

Operating Pressure：250 Bar

Internal Leakage：3 drops/min. max. at 250 Bar 

Crack Pressures：

0.2=0.2 Bar

1.0=1.0 Bar

2.1=2.1 Bar

3.4=3.4 Bar

4.8=4.8 Bar

Temperature:-22°F to +250°F (-30°C to +120°C) 

Solenoid operated valves

Solenoid operated valves differ from manually and hydraulically

pilot-operated valves in that they are electrically controlled as

opposed to using complex mechanical linkages or bulky hydraulic

pilot lines to actuate the valve. 2 Position 2 Way Solenoid Valves

Specifications

Max. Operating Pressure :250Bar 

Internal Leakage:2 drops/min. Max at 207 Bar

Temperature：-22°F to +250°F (-30°C to +120°C)

Coil Rating:Continuous from 90% to 110% of rated voltage.

Fluids:Mineral-based fluids.

Body Material：Anodized 6061T6 aluminum alloy rated at 207 Bar.

Counterbalance valves

Cartridge Counterbalance Valves are a regulating mechanism on valve-powered cylinders, such as those on electrical repair trucks. The counterbalance valves serve to limit the amount of fluid change within the flange, thus preventing sudden changes in pressure and resultant instability.
Cartridge Counterbalance Valves work by reacting to the weight of the load as that weight is translated into pressure on the pump cylinder.
Hydraulic Cartridge Counterbalance Valves are used in hydraulic systems working with overriding (running-away) or suspended load. They are designed to create backpressure at the return line of the actuator to prevent losing control over the load. 
Specifications

Maximum Setting：350 Bar(CBEG,CBEH) 

Maximum Recommended Load Pressure at Maximum Setting：270Bar(CBEG,CBEH).

Internal Leakage：5 drops/min.

Temperature：-22T to +250°F(-30°C to +120°C )

Fluids：Mineral-based fluids.

Cavity：SUN T-2A

Pilot Ratio：(CBEG)4.5:1 ； (CBEH)10:1

Body Material：Anodized 6061T6 aluminum alloy rated at 207 Bar.

If you want to get more information,please visit our website: http://www.best-hydraulic.com/product-CB_Counterbalance_Valves_120L_per_min_179.html

Relief Valves RV-08

Cartridge Direct Relief Valves are spring-loaded throttling relief valves used as downstream  pressure regulators to protect the system from overpressure. A smooth throttling action minimizes pressure surges in the system during relief operation. Relief Valves RV-08 are ideal for low-pressure settings due to the increased sensitivity provided by a large diaphragm area. Relief Valves RV-08 are designed for pressure control

Specifications

Operating Pressure：250 Bar

Internal Leakage(5 drops/min.MAX.to 80% of norminal setting Reseat Pressure: Nominal 80% of crack pressure[crack(set) pressure at 0.95lpm/0.25gpm]

Spring Ranges：40 TO 270 BAR； preset：160 BAR 

Temperature：-22°F to +250°F (-30°C to +120°C)

Recommended Filtration：ISO 19/15 

Body Materia：Anodized 6061T6 aluminumalloy rated at 207 Bar.

Hand Pumps HP-06

Operated Cartridge Hand Pump is an essential part of any pressure test or calibration system and dramatically influence the ability to generate the pressures needed to stimulate installed field devices. These high quality, high performance hand pumps are designed for ease of use and reliability. A choice of adaptors and hoses simplify device connections, reduce leakage and improve safety and for convenience there are flexible carrying systems.

Specifications

Operating Pressure：207Bar;

Flow:HP-06: 4.0 cc per stroke.

Internal Leakage:2 drops/min. max. at 138Bar 

Temperature:-22°F to +250°F (-30°C to +120°C) 

Recommended Filtration：ISO 16/12 

Fluids：Mineral-based fluids.For other fluid compatibility

Cavity：10-2 

Body Material：Anodized 6061T6 aluminum alloy rated at 207 Bar